A wide range of lubricant blending plant is a matter, usually organic; introduce to decrease the friction among surfaces in mutual contact, which in the end decrease the heat produce when the surfaces move. It might also have the utility of spread the forces, transport the foreign particle, or heating or cooling the surfaces. The belongings of reducing friction are known as lubricate.
Plant Size
The plant shall be suitable for a production of 300KLPA of Lubricating oil (Automotive and Industrial) and the following equipment, utilities & services have been considered. Actual Requirements has been worked after finalization of Deal:
Electrical
The electrical power distribution system has been developed based on the considerations that LT power will be available at 430V, 50 Hz, 3 Phase or available Voltage in your country at the proposed MCC room.
MANUFACTURING PROCESS:
The manufacture of Lubricants involves the following steps
AIR & WATER POLLUTION:
There is no process water requirement in the manufacturing process in the plant.
There are no chemical reactions involved in the manufacturing process, hence, no emission during process in the plant to create air pollution.
Quality Control Facilities
The proposed plant shall have a quality control laboratory attached to the production facility for on the spot testing / analysis of various raw materials for its quality and fitness. Key process parameters of every batch are to be monitored and controlled systematically for the production of quality product. This requires facilities for quick analysis and process control laboratory having the necessary instruments and skilled manpower.
PLANT UTILITIES
The appropriate capacities of various utilities as indicated are indicative. The actual requirement shall be firmed up during Detailed Engineering stage, after taking into consideration the location conditions.